
![]() |
![]() |
Speaker Setup
The Speaker Setup is a standard 5.1 surround speaker setup. I guess you all know this by now, but still a run through: Two speakers in the front on either side, one in the center, two in the rear on the either side, and the sub-woofer in the corner near a wall.

All connectors of the speakers are placed at the rear of the sub-woofer. There are two sets of connectors: input and output.
Output consists of colored connectors for the corresponding colored speaker pin. The cables of the satellite speakers are quite long and can be easily setup with a computer system without any extensions. The other output connector is for the Control Pod of the system. Since the system can be used as plug-n-play as well as a Home Theater system, there are two input connectors. One is a USB for the plug-n-play aspect while three stereo jacks (Front, Surround, CLFE). Other than these, there is a switch for 2/4 and 6. With the switch at 2/4, the system automatically converts the sound from 2 channel to 4 channel. Keeping the switch at 6 can be used only when being used with a proper 5.1 sound card or a DVD Player.
![]() |
![]() |




Report abuse